Embedding Accessories
Med Vet International Jorvet 18g x 15cm Chiba Style Biopsy Needle, J0527A
Jorvet 18g x 15cm Chiba style biopsy needle, is a general purpose aspiration needle. It has a shor bevel to remove samples from controlled areas. It attaches to standard syringes. This product is sterile and not autoclavable.
Med Vet International Jorvet 18g x 9cm Chiba Style Biopsy Needle, J0527
Jorvet 18g x 9cm Chiba style biopsy needle, is a general purpose aspiration needle. It has a shor bevel to remove samples from controlled areas. It attaches to standard syringes. This product is sterile and not autoclavable.
Leica Biosystems BIOPSY BAG SM 30INX45MM 500/PK
Manufactured from solvent resistant nylon, these Mesh Biopsy Bags are ideal for use in processing small biopsies. They provide fluid exchange and tissue safety. The fixative and specimen can be poured into the bag which then filters the fixative and leaves the biopsies inside. The bag is then closed, placed inside a Biopsy Cassette and processed as normal. After processing, the bag can be extracted and opened, allowing the specimen to be recovered and embedded in paraffin wax.
Med Vet International Jorvet 22g x 15cm Chiba Style Biopsy Needle, J0527E
Jorvet 22g x 15cm Chiba style biopsy needle, is a general purpose aspiration needle. It has a shor bevel to remove samples from controlled areas. It attaches to standard syringes. This product is sterile and not autoclavable.
Med Vet International Jorvet 14g x 9cm Super Core Biopsy Needle, J0528
Jorvet 14g x 9cm super core biopsy needle, is sterile and not autoclavable. It has a spring activated single handle operation, is lightweight, has a echogenic tip for ultrasound visualization, and a 20mm specimen notch. Each needle is marked cm graduations.
Electron Microscopy Sciences Flat Embedding Mold Small Flat Embedding Mold, 4 mm deep, 10 x 6 mm
A clear silicone rubber with very high tear strength. It can be reused more times than the conventional silicone molds. It is resistant to most epoxy resins and its clear base allows positioning of the specimen lighted from beneath. This mold produces 12 embedding blocks with tapered ends.
Depth: 4 mm
Size: 10 x 6 mm
Cavities: 12
Electron Microscopy Sciences T-Sue™ Microarray Mold Kit, 2 mm
T-Sue array molds are specifically designed to be simple, easy to use and inexpensive. The tissues can be analyzed in consistent conditions enhancing the efficiency of the research. Allow you to perform TMAs more quickly with excellent results. By using array molds, you can process up to 170 specimens onto one single slide in very little time.
Made of silicone, these molds can withstand temperatures between -100 deg C to +250 deg C and be reused hundreds of times without losing their flexibility.
Each kit includes one T-Sue array mold and four punch needles with stylet.
Size: 2 mm
Capacity: 24 cores
Electron Microscopy Sciences Flat Embedding Mold 3 mm with Cocoon Box
No more stickiness with new storage boxes. Most resins are no longer a challenge to flat embed when used in combination with the Cocoon box. The system withstands temperatures up to 70 Degrees C, and our flat embedding of many resins is made easier.
Electron Microscopy Sciences Micro-Bed Embedding Resin 500 ML
Micro-Bed resin is a water-soluble resin, a mixture of acrylate and polyester resins. Universal embedding medium that may be used for light or electron microscopy.
Due to its non-crosslinking characteristics, its hydrophilic nature, and roughness of its section surface, it is excellent in preserving tissue structure, offers good results in immunolabeling, and stands up well to conventional stains.
In LM, tissues were stained with conventional histological stains (e.g.,hematoxylin-eosin) and embedded in Micro-Bed: results comparable with those provided on paraffin embedded tissues. Polychrome silver-based and cytochemical stains (e.g.,PAS) were also feasible. In TEM, images as good as those obtained with similar acrylic resins, (e.g., Lowicryl K4M), were obtained.
Supplied as a single component-ready to use pre-mixed resin. Micro-Bed can be polymerized by heat (55-65°C) or UV (365nm) at -10 to 20°C for 72 hours.
Electron Microscopy Sciences Thompson Monolayer Embedding Mold
This mold used for embedding mammalian cells in monolayer culture in preparation of sectioning for light or electron microscopy. Tissue culture monolayer embedding molds eliminate the need for traditional BEEM capsules. The improved molds can be used to transfer the majority of cells from the entire surface of a cover slip to avoid losses of large amounts of cellular information occurring only randomly. In addition, other problems such as surface blemishes caused by air entrapment associated with BEEM capsules are eliminated.
Leica Biosystems Metal Base Molds 15 x 15 x 6 mm (Pack of 10)
Reusable metal base molds used for forming embedding wax blocks in histology workflows. Each mold measures 15 x 15 x 6 mm and is supplied as a pack of 10. The molds fit standard tissue embedding cassettes and provide consistent block formation and efficient heat transfer.
- Reusable metal construction for repeated use.
- Internal rounded corners allow easy removal of formed wax blocks.
- Dimensions: 15 x 15 x 6 mm.
- Pack quantity: 10 per pack.
- Compatible with most standard tissue embedding cassettes.
- Provides rapid heat transfer for efficient wax setting.
Electron Microscopy Sciences 5 Block Embedding Mold-2 Part- 8 mm Body with 2 mm Cylindrical
The block embedding mold features an innovative new design based on the widely used Ø8 mm size embedding mold. The unique two part design allows for easy removal of resin blocks, as well as incorporating many other advantages over currently available embedding products.
It has separate base and tube sections that clip together to form the familiar capsule shape. It allows for easy removal of resin blocks achieved by simply pulling the mold apart by hand.
It can produce blocks up to 20 mm in length with no razor blades or capsule presses are required. Each mold can be clipped to other molds, allowing for the creation of trays of desired size. Each cavity is numbered 1 < 5, whilst the end support stands have designated areas for writing indexing numbers or comments.
Electron Microscopy Sciences Embedding Cassette Disposable Base Mold, 30 x 24 mm, 5 mm height
Clear plastic. Eliminates use of cleaning solvents and release compounds.
Footprint: 30 x 24 mm
Height: 5 mm
Electron Microscopy Sciences T-Sue™ Precast Paraffin Block, 2 mm
Precast T-Sue Microarray paraffin blocks are used to construct a tissue array block in minutes by simply punching the donor tissue cores and inserting into a pre-made paraffin recipient block. It is an easy, convenient, and low cost method for constructing paraffin tissue microarrays. The blocks are made of paraffin and the cassettes are made of acetal. The cassette is permanently bonded to the block and has consistent core diameters. It is ready to accept cores from the donor block.
Kit includes 6 Precast T-Sue Paraffin blocks and two punch needles with stylet.
Size: 2 mm
Capacity: 60 cores
Electron Microscopy Sciences Disposable Base Mold, 24 x 24 mm, 5 mm height
Our Disposable Base Mold is designed to fit all existing cassettes. Because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals.
Size: 24 x 24 mm
Height: 5 mm